zBudget Custom Roller Shade with Continuous Loop Chain With Mirage Light Filtering Polyester Fabric

no category: no subcategory:

zBudget Custom Roller Shade with Continuous Loop Chain With Mirage Light Filtering Polyester Fabric

cheap, roller shade, light filtering, polyester fabric

Product At A Glance
Slat Size	NA
Material	Polyester Fabric
Production Time	3 to 5 Business Days
Install Instructions	Roller

Description

Our Budget Shades provide quality, good looks and low price. This shade has Fauna light filtering fabric. Mirage fabric is 100% Polyester. It has a similar look and feel similar to linen and is very popular.

Mirage fabric is 72” wide. Mirage shades wider than 72” will be rail - roaded and some sizes may require a seam. For a more finished custom look include a decorative hem. (See the options box below and click on the red question mark to see a photo of the hem). The colors below are the same on both sides of the fabric.

Fauna is Translucency rated 3 – moderate to good light reduction and some privacy. It can be cleaned with a light vacuum or damp cloth with mild soap (should not rub). The large selection of vibrant colors makes decorating a snap.

For ease of operation the shade comes standard with a clutch rather than spring roller. Each shade has a continuous nylon loop chain, which raises and lowers the shade when pulled in either direction. The clutch has a brake which keeps the shade in the desired position. The chain is color coordinated. The clutch helps lift the shade’s weight as it is raised. The control chain always remains the same length no matter what position the shade is in which is safer for homes with children or pets. Depending on the size of the shade and the weight of the fabric the roller tube is 1” or 1 3/8” in diameter. As standard, the controls are on the right side; however, you may select left side controls from the options box at no additional charge. To eliminate the chain you can select the Auto Stop option (for details click on the red question mark behind the Auto Stop option below).

The shade is equipped with a new spring loaded end plug which makes it possible for just one person to quickly install the shade. The end plug locks the shade safely in place and automatically adjusts for measurement inaccuracies through its patented spring function. The finished look is both elegant and symmetrical in design. Supplied with 3mm steel universal brackets that can be used for both right and left sides. Finished with decorative end cap covers for outside mounts.

A cassette valance system is available. The cassette includes the continuous loop control and has a matching fabric insert. The bead chain is color coordinated (reverse roll option not available on cassette). To see an image of the cassette system click on the red question mark in the options section below. To order the cassette system with your shade, check the appropriate box below.

If ordering this shade for a door please note that hold down brackets are not available. Velcro can be used.

IMPORTANT: Concerning roller shades the width that you order is called the “tip to tip” measurement. The tip to tip measurement is the measurement from bracket to bracket after all the hardware has been placed on the roller tube. The fabric cannot be and will not be as wide as the “tip to tip” measurement. On all roller shades that have a clutch the fabric will be approximately 1 1/8” to 1 ¼” less wide than the “tip to tip” measurement. (Example: if the ordered width of the shade is 36 1/4” the fabric will be approximately 35” wide). This is true for all roller shades that are equipped with a clutch. So, roller shades, when installed as inside mount, will have small light gaps on each side of the shade. This is necessary to accommodate the side-mounted brackets and other hardware. This is a characteristic of all roller shades regardless of the manufacturer. All roller shades that utilize a clutch will have a light gap of approximately ¾” on one side and a ½” light gap on the other side. On spring roller shades such as our Cost Cutter shade there will be a light gap of approximately 5/8” on both sides. (When measuring the windows do not make any reductions – use exact measurements. The factory will make the necessary reductions. (See instructions for measuring windows).

Specifications:

• Min IB Mounting Depth: 3/4"
• IB Flush Mount: Approximately 2 1/4" for 1 1/8" tube or 2 1/2" for 1 3/8" tube
• OB Minimum Flat Vertical Surface: 3/4"
• Cassette Valance: Min width 12" Max width 84"
• Autostop: Min width 22" Max width 78" Max length 88"

Production time for this product is 5 to 7 business days. Please allow 2 to 5 business days for shipping.

Standard Features

• Painted Metal Roll Bar
• Clutch System with Brake
• Continuous Chain Loop
• Color Coordinated Chain

• Control Right Side
• Patented Spring Loaded End Plug
• Mirage 100% Polyester Light Filtering Fabric

Select Options