Artisan Custom Roller Shade with Whitney Light Filtering Polyester Fabric

Roller Shades: Decorative Fabric: Bali:

Artisan Custom Spring Roller Shade with Whitney Light Filtering Polyester Fabric

splendor, light filtering, polyester, whitney, roller shade

click to enlarge

Product At A Glance
Slat Size	NA
Material	Polyester Fabric
Production Time	3 to 4 business days
Install Instructions	Roller

Standard Features

• Spring Roller Mechanism
• Polyester Light Filtering Fabric

• Standard Hem Bar

Select Options

Reverse Roll - no charge

Mount:

Select Color

Whitney Lt Filtering White	Whitney Lt Filtering Ivory	Whitney Lt Filtering Cream	Whitney Lt Filtering Coffee	Whitney Lt Filtering Oyster

Enter Dimensions

" Width " Height Need help measuring?


More Details

This shade has a spring mechanism. We always recommend the shade with a continuous loop clutch control but this shade is great when you do not want a cord or chain hanging in the window. To operate a spring roller shade, you jostle the hem bar. The shade is equipped with an attractive polyester fabric that filters the light that enters the room and provides privacy. IMPORTANT: Concerning roller shades, the width that you order is called the “tip to tip” measurement. The tip to tip measurement is the measurement from bracket to bracket after all the hardware has been placed on the roller tube. The fabric cannot be and will not be as wide as the “tip to tip” measurement. On all roller shades that have a clutch the fabric will be approximately 1 1/8” to 1 ¼” less wide than the “tip to tip” measurement. (Example: if the ordered width of the shade is 36 1/4” the fabric will be approximately 35” wide). This is true for all roller shades that are equipped with a clutch. So, roller shades have small light gaps on each side of the shade. This is necessary to accommodate the side-mounted brackets and other hardware. This is a characteristic of all roller shades regardless of the manufacturer. All roller shades that utilize a clutch will have a light gap of approximately ¾” on one side and a ½” light gap on the other side. On spring roller shades there will be a light gap of approximately 5/8” on both sides. (When measuring the windows do not make any reductions – use exact measurements. The factory will make the necessary reductions. (See instructions for measuring windows). Specifications: Minimum width: 14" Maximum width: 109" Minimum height: 12" Maximum height: 108" Minimum Mounting Depth for Inside Mount: 3/4" Minimum Mounting Depth for Inside Flush Mount: Approximately 2 1/4" for 1 1/8" tube and 2 1/2" for 1 3/8" tube Minimum Flat Vertical Surface for Outside Mount: 3/4" Production time for this product is 3 to 4 business days. Please allow 2 to 5 business days for shipping.

Developed by Site Revision, Inc.